電纜橋架老化的原因是什么呢
電纜橋架老化的原因是什么呢?下面電纜橋架廠家給大家介紹一下。
What is the cause of the cable bridge aging? The following cable tray factory to introduce for you.
化學和電解腐蝕。電纜被埋在酸性或堿性的環境中,電纜表皮經過長期的腐蝕就會降低絕緣,老化,甚損壞。
Chemical and electrochemical corrosion. Cable is buried in acidic or alkaline environment, cable skin through long-term corrosion can reduce insulation, aging, and even damage.
機械損傷。由于電纜敷設施工違規或埋在地面上有電纜土建施工會損壞電纜,長的電纜可能會造成機械損壞故障損傷部位,導致故障。溫度和濕度。如果電纜很長的高溫環境下,電纜絕緣被擊穿,可能會引起火災或爆炸。
Mechanical damage. Because cable laying construction violations or buried in the ground have damage to the cable and cable construction and long cable fault injury may cause mechanical damage, resulting in failure of safety. Temperature and humidity. If the cable is very long under the environment of high temperature, cable insulation breakdown, may cause fire or explosion.
電纜長期超負荷工作。高負荷長期的加速老化熱量使電纜的絕緣層,甚擊穿,這也是非常危險的。
Cable overload for a long time. High load for a long time of accelerated aging heat to make the insulation of the cable, and even breakdown, it is very dangerous.
以上便是對電纜橋架的簡單介紹,希望對大家有所幫助,如果您還有其它問題,歡迎登陸我們的官網或打通我們的電話!
This is a simple introduction of cable tray, hope to be of help, if you have other questions, welcome to visit our website or through our phone!
上一篇:關于電纜橋架安裝時應注意
下一篇:講解一下槽式電纜橋架接地要點
下一篇:講解一下槽式電纜橋架接地要點
相關文章 / Recommended news
- 山東電纜橋架:電纜橋架系統中常見的問題之一是負載能力不足
- 濟南電纜橋架廠家:選錯橋架=白花錢?一圖看懂電纜橋架類型大全
- 山東電纜橋架:鋁合金橋架因其輕、強、耐腐蝕受到各種工程方的喜愛
- 濟南電纜橋架:如何根據實際需求選擇合適的橋架材質和結構?
- 山東電纜橋架:以冷軋鋼板制成的熱鍍鋅電纜橋架特別適合各種強酸、堿霧氣等強腐蝕環境使用
- 濟南電纜橋架:噴涂橋架和防火橋架因噴涂粉末不同造成用途不同
- 山東電纜橋架廠家:潮濕地區使用不銹鋼電纜橋架是不錯的選擇
- 濟南電纜橋架:不同材質的電纜橋架各自有哪些性能特點
- 山東電纜橋架:潮濕環境如地下室衛生間該選哪種材質的橋架
- 電纜橋架是什么?主要用于哪些場景?







